New Technology Meter (NTM)

We have taken the best of analog meters and digital meters to offer you our award winning New Technology Meters (NTM) - the third revolution in panel meter technology!

The NTM Series is designed to be an:

  • Analog Meter Replacement
  • Digital Meter Replacement
  • New Digital Panel Meter
  • New Digital Controller
  • New Digital Transmitter
  • The possibilities are endless!

All NTM Series are Made in USA and feature OTEK's Exclusive Lifetime Warranty.

Please look at the table below to review the NTM Product Features as well as the aging and obsolete analog and digital meters for which the NTM can be a 100% Form Fit and Function replacement. OTEK's patented loop-powered technology is a 2-wire compatible analog meter replacement...no external power required.

The NTM Series Features:
  ● An Automatic Tri-Color Bargraph
  ● 4 Full Digits for 0.01% Resolition
  ● Bottom-Top-Bottom or Center Zero
  ● Full Bar or 1, 3 or 5 Segment Pointer
  ● 4 Relays / SSR Alarms
  ● 1 to 4 Isolated Channels
  ● 1 to 4 4-20mA Outputs
  ● Math Functions and Tables
  ● Isolated USB/485/Ethernet
  ● Self Diagnostics 
  ● DCS / SCADA / Stand Alone PAC
  ● Signal / Loop / Universal Power
  ● >10<100mW Power Requirement 
  ● Input Failure Alarm and Report
  ● >30 Analog / Serial Inputs
  ● MIL / Nuclear / Industrial Grades
  ● SV&V Hardware and Firmware
  ● Explosion Proof Certified 
  ● DIN Rail / Panel Transmitter
  ● Customs Welcome
  ● Proudly made in the USA
 
 
 
 
 
Replace Fit, Form & Function:
  Any 1/8 DIN DPM with the NTM-0 or NTM-B or NTM-V
  Sigma 9270 with the NTM-1
  Any 48 x 144mm meter with the NTM-1
  VMI 2000 with the NTM-2
  Any 72 x 144mm meter with the NTM-2
  DB40 with the NTM-3NTM-M or NTM-N
  Chessell 700 with the NTM-4
  Any 6 x 3" meter with the NTM-5   
  TBD with the NTM-5
  Bailey RY with the NTM-6
  Dixson 101 and 102 with the NTM-6
  Bailey 775 with the NTM-7
  Foxboro 257 with the NTM-8
  Any 6 x 1.75” meter with the NTM-9
  GE180 with the NTM-9
  Any 1/4 DIN meter with the NTM-A
  Sigma 9283 with the NTM-B or NTM-V
  590 with the NTM-D
  DCS with the NTM-D
  Any 3.5" analog meter with the NTM-D
  FPM with the NTM-F
  LPE with the NTM-L
  Any 2.9 x 1.5" with the NTM-L
  Dixson BE101 and BE 051 with the NTM-P
  HI-QSLIM with the NTM-S
  Any 6 x 1" meter with the NTM-S   
  Any explosion proof meter with the NTM-X

Build an NTM with our part configurator:

  •           Compare all 20 models.
  •           Select desired options to build a specific part.
  •           Get instantaneous pricing.
  •           Get a customized user's manual with all connections.

Click here to start building your part!

    

The NTM-P housing is an industry standard 6.6 x 1.4" available in plastic. This single channel unit is available in loop (4-20mA), A.C. signal or external power to replace fit, form and function any analog or digital panel meter. Our Powerless (loop/signal) versions only consume <60mW, comparable to an analog meter! The external power series features over 30 signal conditioners.

The unit is equipped with a 51 segment automatic and programmable tricolor bargraph and four digit LED display (9.9.9.9 and -1.9.9.9). Standard factory set color changes are: red: <10 and >90%, yellow: <20 and >80%, green: >20 and <80% of full scale (you can change it with simple commands).

The NTM-P features automatic signal fail detect (open or short) and serial transmission with run time stamp and unit ID. Serial communication options include USB and RS485.

Our patented (and pending) hardware and firmware gives you the highest reliability at the lowest cost. Our flexible firmware allows the NTM-P to operate efficiently with improved response time and offers several math functions such as X-Y tables, polynomials and log-anti-log functions.

Additional features of the external powered NTM-P include isolated retransmission (4-20mA or 30V) and universal power inputs (5-32VDC or 90-265VAC).

We have combined over 40 years of experience with the latest ASIC uC and ultra-efficient multicolor LED technology to bring you into the 21st century. Our multi-supplier modular design prevents obsolescence for many years to come. The NTM Series has no moving parts so as to eliminate stuck needles, recalibration and replacement. All OTEK products have a lifetime warranty as a reflection of our quality.

The NTM Series includes 20 industry standard models. See if we have a model that fits your needs. If you do not see what you need, tell us your custom needs and we'll make it!

 

 

The NTM-S has an industry standard 6 x 1” plastic housing. This single channel unit is available in loop (4-20mA), A.C. signal or external power to replace fit, form and function any analog or digital panel meter. Our Powerless (loop/signal) versions only consume <60mW, comparable to an analog meter! The external power series features over 30 signal conditioners.

The unit is equipped with a 51 segment automatic and programmable tricolor bargraph and four digit LED display (9.9.9.9 and -1.9.9.9). Standard factory set color changes are: red: <10 and >90%, yellow: <20 and >80%, green: >20 and <80% of full scale (you can change it with simple commands).

The NTM-S features automatic signal fail detect (open or short) and serial transmission with run time stamp and unit ID. Serial communication options include USB and RS485, externally powered units include the additional options of Ethernet and flash memory (µSD).

Our patented (and pending) hardware and firmware gives you the highest reliability at the lowest cost. Our flexible firmware allows the NTM-S to operate efficiently with improved response time and offers several math functions such as X-Y tables, polynomials and log-anti-log functions.

Additional features of the external powered NTM-S include isolated retransmission (4-20mA or 30V), universal power inputs (5-32VDC or 90-265VAC) and control output options of O.C.T. (4/channel) or relays (4/channel).

We have combined over 40 years of experience with the latest ASIC uC and ultra-efficient multicolor LED technology to bring you into the 21st century. Our multi-supplier modular design prevents obsolescence for many years to come. The NTM Series has no moving parts so as to eliminate stuck needles, recalibration and replacement. All OTEK products have a lifetime warranty as a reflection of our quality.

The NTM Series includes 20 industry standard models. See if we have a model that fits your needs. If you do not see what you need, tell us your custom needs and we'll make it!

The NTM-V housing is an industry standard 5.7 x 2.84” available in metal only. This unit houses up to 2 channels and is available in loop (4-20mA), A.C. signal or external power to replace fit, form and function any analog or digital panel meter. Our Powerless (loop/signal) versions only consume <60mW, comparable to an analog meter! The external power series features over 30 signal conditioners.

The unit is equipped with a 51 segment automatic and programmable tricolor bargraph and four digit LED display (9.9.9.9 and -1.9.9.9). Standard factory set color changes are: red: <10 and >90%, yellow: <20 and >80%, green: >20 and <80% of full scale (you can change it with simple commands).

The NTM-V features automatic signal fail detect (open or short) and serial transmission with run time stamp and unit ID. Serial communication options include USB and RS485, externally powered units include the additional options of Ethernet and flash memory (µSD).

Our patented (and pending) hardware and firmware gives you the highest reliability at the lowest cost. Our flexible firmware allows the NTM-V to operate efficiently with improved response time and offers several math functions such as X-Y tables, polynomials and log-anti-log functions.

Additional features of the external powered NTM-V include isolated retransmission (4-20mA or 30V), universal power inputs (5-32VDC or 90-265VAC) and control output options of O.C.T. (4/channel) or relays (4/channel).

We have combined over 40 years of experience with the latest ASIC uC and ultra-efficient multicolor LED technology to bring you into the 21st century. Our multi-supplier modular design prevents obsolescence for many years to come. The NTM Series has no moving parts so as to eliminate stuck needles, recalibration and replacement. All OTEK products have a lifetime warranty as a reflection of our quality.

The NTM Series includes 20 industry standard models. See if we have a model that fits your needs. If you do not see what you need, tell us your custom needs and we'll make it!

The NTM-X  housing is an industry standard 4 x 4” explosion proof metal. This singel channel unit is available in loop (4-20mA), A.C. signal or external power to replace fit, form and function any analog or digital panel meter. Our Powerless (loop/signal) versions only consume <60mW, comparable to an analog meter! The external power series features over 30 signal conditioners.

The unit is equipped with a 51 segment automatic and programmable tricolor bargraph and four digit LED display (9.9.9.9 and -1.9.9.9). Standard factory set color changes are: red: <10 and >90%, yellow: <20 and >80%, green: >20 and <80% of full scale (you can change it with simple commands).

The NTM-X features automatic signal fail detect (open or short) and serial transmission with run time stamp and unit ID. Serial communication options include USB and RS485, externally powered units include the additional options of Ethernet and flash memory (µSD).

Our patented (and pending) hardware and firmware gives you the highest reliability at the lowest cost. Our flexible firmware allows the NTM-X to operate efficiently with improved response time and offers several math functions such as X-Y tables, polynomials and log-anti-log functions.

Additional features of the external powered NTM-X include isolated retransmission (4-20mA or 30V), universal power inputs (5-32VDC or 90-265VAC) and control output options of O.C.T. (2/channel) or relays (2/channel).

We have combined over 40 years of experience with the latest ASIC uC and ultra-efficient multicolor LED technology to bring you into the 21st century. Our multi-supplier modular design prevents obsolescence for many years to come. The NTM Series has no moving parts so as to eliminate stuck needles, recalibration and replacement. All OTEK products have a lifetime warranty as a reflection of our quality.

The NTM Series includes 20 industry standard models. See if we have a model that fits your needs. If you do not see what you need, tell us your custom needs and we'll make it!

 

 

The UPM-0 is available in either a loop (4-20mA), A.C. or D.C. signal or external power version. The external powered versions can accommodate 4 relays, isolated DAC and power for the analog output (1 per channel).  Other options include >30 signal conditioners and isolated input power options, as well as Ethernet, USB or RS485 and automatic/programmable colors (red/green/yellow) on each character.

You can use the UPM as a DPM (Digital Panel Meter) for analog inputs and/or a universal timer/counter for 15 different functions, including Log & Anti-Log, Datum Zero, Frequency, etc.  In addition, the included match functions (+, -, √, ÷, x) enable it to be used as a scientific counter.

The UPM-0 meets 1/8 DIN mechanical dimensions and is available in Nuclear Class 1E, MIL-Std., and industrial grades.

The UPM Series features 10 different mechanical models, from the flat pack to the explosion proof, and custom orders are welcome!

As with all our products, the UPM comes with a Lifetime Warranty (limited) and has a CMTBF (Calulated Mean Time Between Failure) of 40 years!

The UPM-3 is available in either a loop (4-20mA), A.C. or D.C. signal or external power version. The external powered versions can accommodate 4 relays, isolated DAC and power for the analog output (1 per channel).  Other options include >30 signal conditioners and isolated input power options, as well as Ethernet, USB or RS485 and automatic/programmable colors (red/green/yellow) on each character.  This model is available with either 1, 2 or 3 channels.

You can use the UPM as a DPM (Digital Panel Meter) for analog inputs and/or a universal timer/counter for 15 different functions, including Log & Anti-Log, Datum Zero, Frequency, etc.  In addition, the included match functions (+, -, √, ÷, x) enable it to be used as a scientific counter.

The UPM-3 meets 4" ANSI mechanical dimensions and is available in Nuclear Class 1E, MIL-Std., and industrial grades.

The UPM Series features 10 different mechanical models, from the flat pack to the explosion proof, and custom orders are welcome!

As with all our products, the UPM comes with a Lifetime Warranty (limited) and has a CMTBF (Calulated Mean Time Between Failure) of 40 years!

Pages