Remote Displays > Digital Display

View All
BCDPM Binary-Coded Decimal Panel Meter

The BCDPM meter (2.91"W x 1.52"H x 1.75"D) is a BCD input remote display with 5 or 3 1/2 digits. An intensity control input is provided for maximum readability on most environments.

OTEK's BCDPM incorporates State-Of-The-Art Technology to assure long life and availability to replace obsoleted units. The unit accepts Multiplexed BCDC (1, 2, 4, 8) and 5 Digit select and decimal point information and displays it on its 0.6" high bright red (green and orange on request). An intensity control input is provided for maximum readability on most environments (Night Vision NVG3 on Request). Two versions are available: A full 5 digit and a 3 1/2 digit with "-" sign (-1999).  PLC 24VDC interface is available (Option 1 On Input Type). The standard unit accepts "TTL" positive logic levels. The HOUSING is made out of machined aluminum,  nickel plated. Sanitary & Explosion Proof can be pipe, panel, wall or conduit mounted.
HI-Q111 Digital Programmable Remote Display

 

The HI-Q111 is part of Otek’s industrial serial remote display series. It is a versatile indicator featuring an LED segment display that allows remote monitoring through any DCS, SCADA, or any other network with RS232C, USB or RS485 protocol ASCII character output. As a slave display the HI-Q111 allows the user to control and display numeric and ASCII characters, in red or green.  The remote display includes an LED in the upper-left corner of the meter face that can be programmed to indicate an alarm state, a cautionary range, sign or any other flag that is relevant to process operation. This remote display complements any of Otek’s HI-Q series of programmable process controllers.  

Otek specializes in customizing instrumentation for process control and automation to fit a variety of needs. For more information please contact us. All of Otek’s products are covered by a lifetime warranty.

Sanitary Casing: Water tight and steam resistant up to 250° F.

Explosion Proof Casing: This meter meets Class I, Div 1 &2 groups B, C, and D; Class II, Div 1 & 2 groups E, F, and G; Class III, NEMA 3,4, 7, 9, and 12; FMC, CSA Cenelee and Baseefa requirements.

 

HI-Q126 Programmable Switchboard Digital Panel Meter

 

The HI-Q 126 is part of Otek’s line of versatile programmable process controllers that are extremely adaptable and can be customized or programmed to fit a variety of process control systems and applications. This switchboard panel display features three 6-digit displays and 8 different alarm state indicator lights. Each display has the capability to be configured for range-based color control as well as display blinking and dimming. All displays and alarms are independent of each other but can be configured for a number of different scenarios and combinations. The HI-Q 126 is highly programmable and capable of displaying a large number of variables and scales, including watts, volts, amps, RPM, percent, or any sensor output such as a 4 to 20 mA output. Input linearization including polynomials, X-Y tables (TC & RTD), flow calculations, and a variety of other mathematical functions make this digital meter an ideal tool for process monitoring and automation. It is available with 1, 2 or 3 analog inputs, and with analog outputs, up to six 10 A relays or up to eight Open Collector Transistors. All settings are accessible over the meter’s serial port or through an optimal four-button keypad on the display face. Its ability to transmit readings makes this digital panel instrument ideal for integration with DCS, SCADA and other control system applications. This digital display is fitted with screw terminal connectors for all analog I/O, a DB-9 connector for the serial connection option and is compatible with USB 2.0 via a converter (USB Transceiver). The HI-Q126 process display is HMI/MMI qualified and compliant with many military, nuclear, and aerospace requirements.

Otek specializes in customizing instrumentation for process control and automation to fit a variety of needs. For more information please contact us. All of Otek’s products are covered by a lifetime warranty.

Sanitary Casing: Water tight and steam resistant up to 250° F. High Temperature/Impact window. Submersible and water tight.

Explosion Proof Casing: This meter meets Class I, Div 1 &2 groups B, C, and D; Class II, Div 1 & 2 groups E, F, and G; Class III, NEMA 3,4, 7, 9, and 12; FMC, CSA Cenelee and Baseefa requirements. Casted aluminum housing.

 

 

HI-QREM 5 digit Remote Panel Meter

OTEK's HI-QREM (2.9"W x 1.52"H) is a 5 digit remote display that was specifically designed under D.O.D. specifications to bring the latest technology to our Armed Forces  for replacing their old obsoleted technology.

The HI-QREM (Remote Panel Meter) accepts RS232, RS485 and the new standard USB V2 and can even be powered by it with a maximum  of "2 Loads" (200mA @ 5VDC).The HI-QREM accepts and displays modified alpha characters for messages such as TEST. DISPLAY INTENSITY can be externally adjusted via a short potentiometer or via serial commands. LAMPTEST: Just send 6 DP and 8s. ADDRESSING of the HI-QREM is up to 255 units. The HOUSING is made out of machined aluminum nickel plated (or Mil-Spec painted) and the connector is screw type "Captive" for high shock and vibration environments. A gasket is supplied for NEMA 4X compatibility. An optional EMI/RFI filter is available. Sanitary & Explosion Proof cases can be pipe, panel, wall or conduit mounted.

SPECIFICATIONS (Industrial)
(at 25
0C & 5VDC )
•Digits: 5 ea. 0.6" High with 5 D.P.
•Power Consumption: 1 Watt
•Isolated Power Input: 500VDC
•Baud Rate: 300 to 19,200 (9600 Default)
•Characters: ASCII Codes 0-9 & Modified Alpha & DP
•Hardware Handshake: None Required
•Operating Temp: 0-60
•Explosion Proof For CLASS I, Div. 1 & 2 Certified
•Calculated MTBF: >100,000 Hours (12+ Years)
•Warranty: Lifetime (LTD)
Note 1: Above specifications are for Industrial Grade.
Contact OTEK for other grades.
 
POWER INPUT can be 5, 12, 24, 48VDC or USB powered consuming a maximum of 1 Watt (less with lower intensity for dark environments). Simple industry standard ASCII characters are accepted as well as mnenomic commands (ie. SNNNMMMMM). Settings are "8N1" with baud rates from 300 to 19,200.
LPE Loop-Powered LED with Serial I/O Digital Panel Meter

OTEK's LPE (2.91"W x 1.52"H x 2.252"D) is a loop powered panel meter, with super high efficiency 0.56" LED 4 1/2 display and over 30 signal input options!

Another World's First By OTEK! To complement it's world's ? rst LCD (Model LPM) Loop Powered Meter, OTEK developed the exact counter part of it but with super high ef?ciency 0.56" LED display, RS232E and all Loop Powered! 

Several Con?gurations are Available:

1. Loop Powered: Just connect 2 wires (+ & - Loop)
2. Loop Powered with RS232E: Just connect 5 wires
3. USB, 5, 12, 24 or 48VDC Input Power: Just connect 4 wires
4. 90-265VAC Input Power: Just connect 4 wires
5. Power for Transmitter: Just connect 4 wires
6. Serial In Remote Display: Just connect 3 wires 
 
The Connector: Seismic Quali? ed Captive & Plug-In
The Housing: Aluminum Nickel Plated or Plastic, Seismic Quali?ed. Optional Sanitary housing available.
Adjustments: Front panel adjustments, or via Serial Port.
The Serial I/O: (Optional): RS232E for Loop Powered RS232D, 485 or USB for external power.
 
The Grades:
a. Intrinsically Safe (IS) by design, for CLI, Div. 1 & 2.
b. Mil-Specs: To Your Requirements.
c. Nuclear: 10CFR1050B
d. Industrial: -10 + 700C, 5-95% RH
 
The Technology:  ASIC Nanotechnology for greater 
reliability
LPM LCD Loop-Powered Panel Meter

OTEK's LPM (2.91"W x 1.52"H x 1.385"D) brings the latest technology to your process! The single I.C. A/D can perform all the func- tions by itself or when the Serial I/O option is included, it can become a microprocessor based DPM with Serial I/O, Scaling, Zero Offset, Peak & Hold, Decimal Point and more.

OTEK's New  LPM Series brings the latest technology to your process! The single I.C. A/D can perform all the functions by itself or when the Serial I/O option is included, it can become a microprocessor based DPM with Serial I/O, Scaling, Zero Offset, Peak & Hold, Decimal Point and more. And all Loop Powered! You can also use the LPM as serial input Remote Display.

The LPM is available in several con? gurations:
1. Loop Powered Stand Alone with or without backlight. 
Only 2 wires to connect! 
2. Externally Powered (VDC) mA/V DPM
3. U.S.B. Powered Your PC provides the power (5VDC). The compact metal case is Seismic Tested. The "EURO" screw connector is screwed to the case.
 
ADJUSTMENTS:  Front panel adjustments; Span is on the left, Zero on the right. BURDEN on your 4-20mA Loop is as low as 0.1V for  externally powered models and as high as 5.5V for Loop Powered with backlight.
 
POWER FOR TRANSMITTER: 28VDC @ 20mA available on externally powered models (Options 1-8). See Note 7. Consumes 200mA @ 5VDC (1 Watt). INTRINSICALLY SAFE Approval: Pending for CLI, Div. 1 & 2 GPS. A-G. See Note #5. MIL-SPEC & NUCLEAR Quali? ed versions are built to your requirements. Contact OTEK. The HOUSING is plastic or machined aluminum, nickel plated. Sanitary can be pipe, panel, wall or conduit mounted.

Pages