CONFIGURE THE PART NUMBER
Please select an option for each digit, then click the "SUBMIT" button at the bottom.
NOTE: Options which are incompatible will be grayed out and cannot be selected.
To access these options please select "RESET ALL."
NOTE: Options which are incompatible will be grayed out and cannot be selected.
To access these options please select "RESET ALL."
Selected Part Number: PNP-G_ _ _ _ _ _ _ -_ _ _ _ |
DIGIT | OPTIONS |
GRADE (Digit 5): |
E: To EPRI-Nuclear & Metal (CONTACT OTEK)
M: TO MIL-SPEC & METAL (CONTACT OTEK) 0: INDUSTRIAL & PLASTIC NEMA 3 2: INDUSTRIAL & PLASTIC NEMA 4X 3: INDUSTRIAL & METAL NEMA 4X 9: Custom - Contact OTEK |
NUMBER OF CHANNELS (Digit 6): |
0: TRANSMITTER ONLY INPUT & OUTPUT
1: ONE 2: TWO 9: Custom - Contact OTEK |
INPUT SIGNAL (Digits 7&8): |
00: 4-20mADC LOOP POWER
01: 25-250 VOLTS A.C., RMS SIGNAL POWER 02: 0.5-4 AMPS A.C., RMS SIGNAL POWER 03: 50-1K WATTS A.C., RMS SIGNAL POWER 04: 40-70 HERTZ/25-250 VAC SIGNAL POWER 09: Custom - Contact OTEK 17: 10-50mA DC, LOOP POWER 18: 25-250 VDC SIGNAL POWER 20: 4-20mA CURRENT LOOP 21: 100uADC/RMS 22: 1mADC/RMS 23: 10mADC/RMS 24: 100mADC/RMS 25: 100mVDC/RMS 26: 1VDC/RMS 27: 10VDC/RMS 28: 150VDC/RMS 29: Custom - Contact OTEK 30: 250VDC/RMS 31: WATTS DC/RMS 1V x 1A 32: WATTS DC/RMS 1V x 1V 33: WATTS DC/RMS 120V x 4A 34: 4 AMP RMS 41: HERTZ (10KHz/5V LOGIC) F.S. 42: HERTZ (120VAC/40-100 Hz) F.S. 43: HERTZ (240VAC/30-100 Hz) F.S. 44: HERTZ (120VAC/500 Hz) F.S. 45: STRAIN-GAGE (≥300<4K Ohm) 47: RTD (PT100) 2, 3, OR 4 WIRES 48: RTD (PT1000) 2, 3, OR 4 WIRES 50: TC (TYPE J) 51: TC (TYPE K) 52: TC (TYPE T) 53: pH (0-14.00) 54: ORP (0-2000mVDC) 55: % RH (SPECIFY SENSOR) 56: RESISTANCE (0-10K Ohm) 57: 10-50mA CURRENT LOOP F.S. |
POWER INPUT (Digit 9): |
0: POWERLESSâ„¢ (SIGNAL POWERED)
1: NON-ISOLATED 5VDC (3.5-5.5V) 2: ISOLATED 5VDC 3: ISOLATED 6-32VDC 4: ISOLATED 25-250VAC/DC 9: Custom - Contact OTEK |
CONTROL OUTPUTS (Digit 10): |
0: NONE
1: "HI" O.C.T. N.O. (30V/30mA) 2: "LOW" O.C.T. N.O. (30V/30mA) 3: "HI" H.V. SPDT REED RELAY 4: "LOW" H.V. SPDT REED RELAY 5: "HI" H.V. SPDT S.S.R. (MOSFET) 6: "LOW" H.V. SPDT S.S.R. (MOSFET) 7: "HI" H.V. SPDT 5A RELAY 8: "LOW" H.V. S.P.D.T. 5A RELAY 9: Custom - Contact OTEK A: 4-20mA RETRANSMISSION NO COMPLIANCE B: 4-20mA RETRANSMISSION WITH COMPLIANCE C: 4-20mA OUT, EXTERNAL CONTROL D: 4-20mA OUT, EXTERNAL CONTROL W/ KIS-PID |
DIGITS ONLY COLOR (ON SCALE PLATE) (Digit 11): |
0: WHITE (STANDARD)
2: RED 3: ORANGE 4: YELLOW 5: GREEN 6: BLUE 7: VIOLET 8: GREY 9: Custom - Contact OTEK |
CUSTOM CALIBRATION TEXT SCALE COLOR (Digit 12): |
0: STANDARD: 0-FS = 0.00-100.00%
9: Custom - Contact OTEK A: NONE (ORDER SEPARATELY) |
DECIMAL POINT (Digit 13): |
0: NONE (1XXXX)
1: 1XXX.X 2: 1XX.XX 3: 1X.XXX 4: 1.XXXX 9: Custom - Contact OTEK |
ADAPTER MTG PLATE (Digit 14): |
0: NONE (USE FOR DIGIT 5 OPTIONS E & M)
1: FOR 1 1/2'' SQR REPLACEMENT 2: FOR 2 1/2" SQR REPLACEMENT 3: FOR 3 1/2" SQR REPLACEMENT 4: 4" SQR (FOR DIGIT 4 OPTION M" 5: FOR 4 1/2" SQR REPLACEMENT 9: FOR DIGIT 4 OPTION H C: Custom (Contact Otek) |
OPTIONAL NOTES: |